Deltor N
This product has been manufactured for years and is used in the field of spreading and coating.
Its structural features involve a galvanic nickel coating both in the horizontal and in the vertical sense according to the roll size. The thickness may vary from 300 to 1000 microns.
The nickel having a hardness between 200 and 300 HV will then be engraved mechanically according to the customer’s requirements and then protected by a catalysed galvanic chromium coating having a hardness of over 1000 HV.
The manufacturing process involves special operations of polishing and previous run-in, which are necessary to ensure an excellent emptying of the cells and a constant product release in grams from the first meter of material produced.
The possible screens are listed in the technical data sheets for mechanical engravings.
| Limits | |
| Minimum roller diameter | 100 mm |
| Maximum roller diameter | 800 mm |
| Minimum table length | 800 mm |
| Maximum table length | 4000 mm |
| Minimum chromium thickness | 0,3 mm |
| Maximum chromium thickness | 1 mm |
| Engraving limits: | none |
Gallery of Deltor engraving configurations
Incisione 6
Incisione 4
Incisione 3
Incisione 2
Incisione 10
Incisione 1
Incisione 7
Incisione 8
Incisione 9
Refurbishment service
Quotation request
Engravings available
Contacts
Simec Group Srl
Deltor Division
Tel: +39 0331 393900
Fax: +39 0331 323382
Email: deltor@simecgroup.com
Certificate
